THERMO-SHIELD® Flex Tac

Thermo-Shield® Acrylic Flex Tac is a primer to be used over bitumen surfaces prior to the application of Thermo-Shield® Roof or Wall Coats.

THERMO-SHIELD® Flex Tac Application

 Apply the Acrylic Flex Tac by roller or airless sprayer on a clean surface at approximately 6.22 square meters (67 sq ft) per gallon in one coat application. Allow drying time for a minimum of 12 hours before the application of Thermo-Shield® Roof or Wall Coats. Do not apply in freezing weather, or when precipitation is imminent.

Use soap and warm water to clean tools and equipment. Rinse with clean fresh water.